PA20819 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

PA20819: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, leg_thickness: 0.062 INCHES NOMINAL IN, heat_treatment: O-ANNEALED, overall_height: 1.660 INCHES NOMINAL IN, first_tip_style: FULL RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-097-9101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PA20819

NSN: 9540-00-097-9101
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 06012 — TRANSTAR METALS CORP (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
leg_thickness	0.062 INCHES NOMINAL IN
heat_treatment	O-ANNEALED
overall_height	1.660 INCHES NOMINAL IN
first_tip_style	FULL RADIUS
first_tip_radius	0.031 INCHES NOMINAL IN
top_flange_width	2.062 INCHES NOMINAL IN
basic_shape_style	T SHAPE
left_top_inside_angle	90.0 DEGREES NOMINAL
right_top_inside_angle	90.0 DEGREES NOMINAL
weight_per_unit_measure	0.290 POUNDS PER LINEAR FOOT LBS
NSN	9540-00-097-9101

COMPONENT DIAGRAM

KEY FEATURES

•

RIGHT SIDE TOP FLANGE THICKNESS: 0.062 INCHES NOMINAL IN

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES: 1.031 INCHES NOMINAL IN

•

RIGHT TOP INSIDE ANGLE: 90.0 DEGREES NOMINAL

•

LEFT TOP INSIDE ANGLE: 90.0 DEGREES NOMINAL

•

HEAT TREATMENT: O-ANNEALED

•

FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG: 0.188 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	1.660 INCHES NOMINAL IN
RIGHT SIDE TOP FLANGE THICKNESS	0.062 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.031 INCHES NOMINAL IN
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
HEAT TREATMENT	O-ANNEALED
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.188 INCHES NOMINAL IN
FIRST TIP RADIUS	0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

SUBSTITUTES & CROSS-REFERENCES 4

60-1621Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

S2912538Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy PA20819?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PA20819?

PA20819 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace PA20819?

There are 4 known substitutes for PA20819: 60-1621, S2912538, AMS-QQ-A-200/11 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for PA20819?

PA20819 is cataloged in the U.S. Government catalog under NSN 9540-00-097-9101. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PA20819 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — PA20819