PA16A3/RG10A71: SWITCH,PRESSURE.
The SWITCH,PRESSURE is a the manufacturer industrial component. Key specifications include overall_width: 2.500 INCHES NOMINAL IN, terminal_type: SCREW, overall_height: 5.406 INCHES NOMINAL IN, overall_length: 2.688 INCHES NOMINAL IN, mounting_method: BRACKET(S) AND UNTHREADED HOLE(S), nominal_thread_size: 0.500 INCHES SINGLE PRESSURE CONNECTION IN. This part is cataloged in the U.S.
Government catalog under NSN 5930-01-090-5404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| overall_width | 2.500 INCHES NOMINAL IN |
| terminal_type | SCREW |
| overall_height | 5.406 INCHES NOMINAL IN |
| overall_length | 2.688 INCHES NOMINAL IN |
| mounting_method | BRACKET(S) AND UNTHREADED HOLE(S) |
| nominal_thread_size | 0.500 INCHES SINGLE PRESSURE CONNECTION IN |
| pressure_switch_type | GAGE |
| contact_adjustability | DEACTUATION POINT ADJUSTABLE AND ACTUATION POINT ADJUSTABLE |
| operating_temp_rating | -4.0 FAHRENHEIT MINIMUM AND 140.0 FAHRENHEIT MAXIMUM DEGF |
| contact_action_stimulus | INCREASE |
| contact_adjustment_type | EXTERNAL DEACTUATION POINT SCREW AND EXTERNAL ACTUATION POINT SCREW |
| pressure_connector_type | PLAIN, THREADED INTERNAL SINGLE CONNECTION |
| NSN | 5930-01-090-5404 |
| OVERALL HEIGHT | 5.406 INCHES NOMINAL IN |
| CONTACT ACTION STIMULUS | INCREASE |
| TERMINAL TYPE | SCREW |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD SECOND VOLTAGE |
| CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD FIRST VOLTAGE |
| CONTACT LOAD CURRENT RATING | 250.0 MILLIAMPERES RESISTIVE LOAD THIRD VOLTAGE |
| MOUNTING METHOD | BRACKET(S) AND UNTHREADED HOLE(S) |
| CONTACT ADJUSTMENT RANGE | +20.00 TO 200.00 ACTUATION POINT POUNDS PER SQUARE INCH GAGE AND +20.00 TO 200.00 DEACTUATION POINT POUNDS PER SQUARE INCH GAGE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.223 INCHES NOMINAL IN |
No substitute or cross-reference records for this part.