PA140-088-1 — SWITCH,ROTARY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

PA140-088-1: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM SINGLE ACTUATOR IN, shaft_length: 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, overall_width: 1.312 INCHES NOMINAL IN, pole_quantity: 1 EACH SECTION FRONT. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-482-2084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PA140-088-1

NSN: 5930-00-482-2084
FSC: 5930 — Switches
CAGE: 71590 — CRL COMPONENTS INC (USA)

SPECIFICATIONS

shaft_type	ROUND, FLATTED SINGLE ACTUATOR
flat_height	0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM SINGLE ACTUATOR IN
shaft_length	0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
overall_width	1.312 INCHES NOMINAL IN
pole_quantity	1 EACH SECTION FRONT
terminal_type	TAB, SOLDER LUG
thread_length	0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height	1.437 INCHES NOMINAL IN
overall_length	2.255 INCHES MAXIMUM IN
shaft_diameter	0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
throw_quantity	18 EACH SECTION REAR
NSN	5930-00-482-2084

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM AT 3:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

FIRST FLAT LENGTH: 0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM SINGLE ACTUATOR IN

•

DETENT ROTATIONAL TORQUE RANGE: +2.000 TO 8.000 INCH-POUNDS SINGLE ACTUATOR IN

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND, FLATTED SINGLE ACTUATOR
OVERALL HEIGHT	1.437 INCHES NOMINAL IN
SHAFT DIAMETER	0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM AT 3:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
FIRST FLAT LENGTH	0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM SINGLE ACTUATOR IN
DETENT ROTATIONAL TORQUE RANGE	+2.000 TO 8.000 INCH-POUNDS SINGLE ACTUATOR IN
ROTOR THROUGH CONNECTION QUANTITY	1 EACH SECTION
CONTACT LOAD CURRENT RATING	300.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL

OTHER ITEMS IN FSC 5930 — Switches

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5930-00-000-0117 5930-00-001-1407 5930-00-001-1890 5930-00-001-2571 5930-00-001-2575 5930-00-001-2580 5930-00-001-2608 5930-00-001-2609

SUBSTITUTES & CROSS-REFERENCES 1

PA140-160Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy PA140-088-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PA140-088-1?

PA140-088-1 is a SWITCH,ROTARY.

What parts can replace PA140-088-1?

There is 1 known substitute for PA140-088-1: PA140-160. Substitute compatibility should be verified for your specific system.

What is the NSN for PA140-088-1?

PA140-088-1 is cataloged in the U.S. Government catalog under NSN 5930-00-482-2084. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PA140-088-1 — SWITCH,ROTARY

Request a Quote — PA140-088-1