PartsTable
Technical Data Sheet
Download PDF

P9402 — PLUG ASSEMBLY,SEALING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P9402: PLUG ASSEMBLY,SEALING.

The PLUG ASSEMBLY,SEALING is a the manufacturer industrial component. Key specifications include material: ZINC ALLOY CASE, bolt_type: SINGLE BEVEL NONREVERSIBLE, thickness: 0.875 INCHES MINIMUM MEMBER IN, design_type: DEAD BOLT, operation_method: KEY DEAD BOLT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-018-1503, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P9402
NSN: 5340-01-018-1503
NIINs: 010181503, 014079125
FSC: 5340 — Hardware, Commercial
CAGE: 66821 — YALE SECURITY INC. DBA NORTON DOOR CONTROL (USA)
SPECIFICATIONS
materialZINC ALLOY CASE
bolt_typeSINGLE BEVEL NONREVERSIBLE
thickness0.875 INCHES MINIMUM MEMBER IN
design_typeDEAD BOLT
operation_methodKEY DEAD BOLT
special_featuresCASE SURFACE TREATMENT:ANY ACCEPTABLE; CASE SHAPE:RECTANGULAR; LOCKING MECHANISM TYPE:PIN TUMBLER; MASTER KEY PROVISION:NOT INCLUDED
NSN5340-01-018-1503
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P9402 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: DEAD BOLT
•
BOLT TYPE: SINGLE BEVEL NONREVERSIBLE
•
MATERIAL: ZINC ALLOY CASE
•
OPERATION METHOD: KEY DEAD BOLT
•
THICKNESS: 0.875 INCHES MINIMUM MEMBER IN
TECHNICAL CHARACTERISTICS
DESIGN TYPEDEAD BOLT
BOLT TYPESINGLE BEVEL NONREVERSIBLE
SPECIAL FEATURESCASE SURFACE TREATMENT:ANY ACCEPTABLE; CASE SHAPE:RECTANGULAR; LOCKING MECHANISM TYPE:PIN TUMBLER; MASTER KEY PROVISION:NOT INCLUDED
MATERIALZINC ALLOY CASE
OPERATION METHODKEY DEAD BOLT
THICKNESS0.875 INCHES MINIMUM MEMBER IN
SUBSTITUTES & CROSS-REFERENCES 1
ANSI BHMA 501 TYPE E97023Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P9402?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P9402?
P9402 is a PLUG ASSEMBLY,SEALING.
What parts can replace P9402?
There is 1 known substitute for P9402: ANSI BHMA 501 TYPE E97023. Substitute compatibility should be verified for your specific system.
What is the NSN for P9402?
P9402 is cataloged in the U.S. Government catalog under NSN 5340-01-018-1503. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P9402

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.