PartsTable / COMPONENT / P93A
P93A
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, end_style: SPRING END,GROUND BOTH ENDS, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, coil_quantity: 10, inside_diameter: 0.352 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1695, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
P93A
NSN: 5330-00-291-1695 FSC: 5330 CAGE: 29690 — CORRECT MFG CORP (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT end_style SPRING END,GROUND BOTH ENDS case_style SQUARE seal_width 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN coil_quantity 10 inside_diameter 0.352 INCHES NOMINAL IN style_designator CYLINDRICAL surface_treatment CADMIUM OVERALL spring_free_length 1.500 INCHES NOMINAL IN coil_helix_direction RIGHT-HAND housing_bore_diameter 2.750 INCHES NOMINAL IN sealing_element_style ANGULAR NSN 5330-00-291-1695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: P93A
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HOUSING BORE DIAMETER: 2.750 INCHES NOMINAL IN
• SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER 2.750 INCHES NOMINAL IN SEAL WIDTH 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT CASE STYLE SQUARE MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
AT1707 Interchangeable interchangeable cross-reference
interchangeable
677-0206-000 Interchangeable interchangeable cross-reference
interchangeable
3158 Interchangeable interchangeable cross-reference
interchangeable
PI2627 Interchangeable interchangeable cross-reference
interchangeable
RR-C-271 Interchangeable interchangeable cross-reference
interchangeable
L19 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy P93A?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P93A?
P93A is a SEAL,PLAIN ENCASED.
What parts can replace P93A?
There are 27 known substitutes for P93A: AT1707, 677-0206-000, 3158 and 24 more. Substitute compatibility should be verified for your specific system.
Is P93A still available?
P93A is currently cancelled.