PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P92081
P92081 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hole_diameter: 0.2500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.0625 INCHES NOMINAL IN, overall_length: 3.0000 INCHES NOMINAL IN, special_features: ONE ADDITIONAL HOLE; 0.6250 IN. DIA IN, cross-sectional_thickness: 0.0625 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-338-7345, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P92081
NSN: 5330-01-338-7345
FSC: 5330
CAGE: 05331 — LULL LIFT CORP DBA OMNIQUIP PARTS WORLDWIDE (USA)
SPECIFICATIONS
materialRUBBER OVERALL
hole_diameter0.2500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.0625 INCHES NOMINAL IN
overall_length3.0000 INCHES NOMINAL IN
special_featuresONE ADDITIONAL HOLE; 0.6250 IN. DIA IN
bolt_hole_quantity2
cross-sectional_thickness0.0625 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
bolt_hole_centerline_to_nearest_edge_distance0.5000 INCHES NOMINAL IN
NSN5330-01-338-7345
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P92081 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.0625 INCHES NOMINAL IN
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.5000 INCHES NOMINAL IN
•
MATERIAL: RUBBER OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.2500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.0625 INCHES NOMINAL IN
OVERALL LENGTH3.0000 INCHES NOMINAL IN
OVERALL WIDTH1.0625 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.5000 INCHES NOMINAL IN
SPECIAL FEATURESONE ADDITIONAL HOLE; 0.6250 IN. DIA IN
MATERIALRUBBER OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.2500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
30-150Interchangeable
interchangeable cross-reference
interchangeable
HK-405Interchangeable
interchangeable cross-reference
interchangeable
WF406Interchangeable
interchangeable cross-reference
interchangeable
853881Interchangeable
interchangeable cross-reference
interchangeable
AN364-428Interchangeable
interchangeable cross-reference
interchangeable
60TA-08X08Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P92081?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P92081?
P92081 is a GASKET.
What parts can replace P92081?
There are 17 known substitutes for P92081: 30-150, HK-405, WF406 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P92081?
P92081 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-338-7345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P92081

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026