PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P848000ZZE5000
P848000ZZE5000 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN, overall_width: 0.3120 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-242-9545, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P848000ZZE5000
NSN: 3110-01-242-9545
FSC: 3110
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
overall_width0.3120 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
overall_outside_diameter1.3121 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM IN
NSN3110-01-242-9545
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: P848000ZZE5000 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
•
OVERALL OUTSIDE DIAMETER: 1.3121 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM IN
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
OVERALL WIDTH0.3120 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
OVERALL OUTSIDE DIAMETER1.3121 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
60-7312Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
PA12813Interchangeable
interchangeable cross-reference
interchangeable
LS5141Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P848000ZZE5000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P848000ZZE5000?
P848000ZZE5000 is a BEARING,BALL,DUPLEX.
What parts can replace P848000ZZE5000?
There are 4 known substitutes for P848000ZZE5000: 60-7312, QQ-A-200/3, PA12813 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P848000ZZE5000?
P848000ZZE5000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-242-9545. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P848000ZZE5000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026