PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P798
P798 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: FLAT CHAMFER, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, corner_shape: SQUARE ALL CORNERS, thread_class: 3A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-530-9255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P798
NSN: 5306-00-530-9255
FSC: 5306
CAGE: 90166 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleFLAT CHAMFER
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
corner_shapeSQUARE ALL CORNERS
thread_class3A A
head_diameter0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
hole_diameter0.047 INCHES NOMINAL IN
hole_quantity6
thread_length0.750 INCHES MINIMUM IN
overall_length0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
fastener_length1.000 INCHES NOMINAL IN
NSN5306-00-530-9255
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: P798 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.047 INCHES NOMINAL IN
•
HOLE CONFIGURATION STYLE: ROUND
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
HOLE TYPE: DRILLED
•
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
HOLE DIAMETER0.047 INCHES NOMINAL IN
HOLE CONFIGURATION STYLEROUND
FASTENER LENGTH1.000 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
HOLE TYPEDRILLED
MINIMUM TENSILE STRENGTH170000 POUNDS PER SQUARE INCH LBS
THREAD CLASS3A A
THREAD QUANTITY PER INCH24
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
AA-1257Interchangeable
interchangeable cross-reference
interchangeable
P79-8Interchangeable
interchangeable cross-reference
interchangeable
PB2440-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P798?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P798?
P798 is a BEARING,SLEEVE.
What parts can replace P798?
There are 3 known substitutes for P798: AA-1257, P79-8, PB2440-16. Substitute compatibility should be verified for your specific system.
What is the NSN for P798?
P798 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-530-9255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P798

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026