PartsTable
Technical Data Sheet
Download PDF

P707-M09-F09-632 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P707-M09-F09-632: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 5.250 INCHES NOMINAL IN, material: STEEL COMP 303 OVERALL, thread_class: 2B LEFT INTERNAL (INCLUDES THRU THREAD), thread_length: 0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN, style_designator: LEFT INTERNAL AND RIGHT INTERNAL THREADS, thread_direction: RIGHT-HAND RIGHT INTERNAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-431-9339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P707-M09-F09-632
NSN: 5340-01-431-9339
FSC: 5340 — Hardware, Commercial
CAGE: 04729 — UNICORP. (USA)
SPECIFICATIONS
length5.250 INCHES NOMINAL IN
materialSTEEL COMP 303 OVERALL
thread_class2B LEFT INTERNAL (INCLUDES THRU THREAD)
thread_length0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
style_designatorLEFT INTERNAL AND RIGHT INTERNAL THREADS
thread_directionRIGHT-HAND RIGHT INTERNAL
surface_treatmentPASSIVATE OVERALL
width_across_flats0.250 INCHES NOMINAL IN
nominal_thread_size0.138 INCHES RIGHT INTERNAL IN
cross-sectional_shapeHEXAGON
thread_quantity_per_inch32 RIGHT INTERNAL
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) LEFT INTERNAL (INCLUDES THRU THREAD)
NSN5340-01-431-9339
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P707-M09-F09-632 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
LENGTH: 5.250 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 E-300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT INTERNAL THREADS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
LENGTH5.250 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072 E-300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
THREAD LENGTH0.375 INCHES MINIMUM RIGHT INTERNAL IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT INTERNAL THREADS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
THREAD DIRECTIONRIGHT-HAND RIGHT INTERNAL
NOMINAL THREAD SIZE0.138 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
2145-632-SS-20Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
073-007687-187Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P707-M09-F09-632?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P707-M09-F09-632?
P707-M09-F09-632 is a STANDOFF,THREADED,SPACING.
What parts can replace P707-M09-F09-632?
There are 2 known substitutes for P707-M09-F09-632: 2145-632-SS-20, 073-007687-187. Substitute compatibility should be verified for your specific system.
What is the NSN for P707-M09-F09-632?
P707-M09-F09-632 is cataloged in the U.S. Government catalog under NSN 5340-01-431-9339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P707-M09-F09-632

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.