PartsTable
Technical Data Sheet
Download PDF

P68049 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P68049: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.375 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.500 INCHES NOMINAL IN, style_designator: CENTER MOUNT, material_diameter: 12.000 INCHES NOMINAL IN, loop_inside_diameter: 11.800 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-116-9721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P68049
NSN: 5340-00-116-9721
FSC: 5340 — Hardware, Commercial
CAGE: 04285 — ATHEY PRODUCTS CORP (USA)
SPECIFICATIONS
diameter0.375 INCHES NOMINAL IN
materialSTEEL BAND
overall_width1.500 INCHES NOMINAL IN
style_designatorCENTER MOUNT
material_diameter12.000 INCHES NOMINAL IN
loop_inside_diameter11.800 INCHES NOMINAL IN
integral_nut_type_and_quantity1 PLAIN EQUAL LENGTH TONGUES
NSN5340-00-116-9721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P68049 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 12.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.375 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 1 PLAIN EQUAL LENGTH TONGUES
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 11.800 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER12.000 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.375 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY1 PLAIN EQUAL LENGTH TONGUES
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER11.800 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
2 0052-435Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P68049?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P68049?
P68049 is a CLAMP,LOOP.
What parts can replace P68049?
There is 1 known substitute for P68049: 2 0052-435. Substitute compatibility should be verified for your specific system.
What is the NSN for P68049?
P68049 is cataloged in the U.S. Government catalog under NSN 5340-00-116-9721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P68049