PartsTable
Technical Data Sheet
Download PDF

P600-5 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P600-5: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, thickness: 0.020 INCHES NOMINAL IN, hole_diameter: 0.113 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN, overall_diameter: 0.188 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-637-9405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P600-5
NSN: 5310-00-637-9405
NIINs: 006379405, 016227316
FSC: 5310 — Nuts and Washers
CAGE: 94697 — MOOG INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
thickness0.020 INCHES NOMINAL IN
hole_diameter0.113 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
overall_diameter0.188 INCHES NOMINAL IN
special_featuresCAGE 58553 ONLY SELLS THROUGH AUTHORIZED DISTRIBUTORS. THE DISTRIBUTORS THAT CAGE 58553 PROVIDED WERE 87732, 0NWY4 AND 0HMZ0.
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyWASHER,PACKING
NSN5310-00-637-9405
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P600-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.113 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
•
THICKNESS: 0.020 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.188 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALCOPPER ALLOY OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.113 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
THICKNESS0.020 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
092-06005Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy P600-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P600-5?
P600-5 is a WASHER,FLAT.
What parts can replace P600-5?
There is 1 known substitute for P600-5: 092-06005. Substitute compatibility should be verified for your specific system.
What is the NSN for P600-5?
P600-5 is cataloged in the U.S. Government catalog under NSN 5310-00-637-9405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P600-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.