PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P60-236
P60-236 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COTTON AND RUBBER SYNTHETIC OVERALL, outside_diameter: 1.875 INCHES NOMINAL IN, aperture_diameter: 1.469 INCHES NOMINAL IN, cross-sectional_thickness: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, cross-sectional_shape_style: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-9049, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P60-236
NSN: 5330-00-599-9049
FSC: 5330
CAGE: 07505 — APPLIED POWER INC POWER PACKER (USA)
SPECIFICATIONS
materialCOTTON AND RUBBER SYNTHETIC OVERALL
outside_diameter1.875 INCHES NOMINAL IN
aperture_diameter1.469 INCHES NOMINAL IN
cross-sectional_thickness0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
cross-sectional_shape_styleCLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
NSN5330-00-599-9049
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P60-236 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.875 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.469 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
•
MATERIAL: COTTON AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.875 INCHES NOMINAL IN
APERTURE DIAMETER1.469 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
MATERIALCOTTON AND RUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
12214Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
150 14Interchangeable
interchangeable cross-reference
interchangeable
97972Interchangeable
interchangeable cross-reference
interchangeable
900Interchangeable
interchangeable cross-reference
interchangeable
685-004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P60-236?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P60-236?
P60-236 is a GASKET.
What parts can replace P60-236?
There are 16 known substitutes for P60-236: 12214, B94.11M, 150 14 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P60-236?
P60-236 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-9049. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P60-236

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026