PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P5SR133SSW26
P5SR133SSW26 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.0935 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN, overall_width: 0.0937 INCHES NOMINAL IN, alignment_type: RIGID, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-218-0729, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P5SR133SSW26
NSN: 3110-01-218-0729
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
bore_shapeSTRAIGHT
bore_diameter0.0935 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
overall_width0.0937 INCHES NOMINAL IN
alignment_typeRIGID
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
surface_treatmentPASSIVATE OVERALL
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL LUBRICATING
NSN3110-01-218-0729
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: P5SR133SSW26 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO. 5P
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO. 5P
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALOIL LUBRICATING
ALIGNMENT TYPERIGID
SHIELD QUANTITY2
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
RC10BF152KInterchangeable
interchangeable cross-reference
interchangeable
304-00-005Interchangeable
interchangeable cross-reference
interchangeable
280-1145P79Interchangeable
interchangeable cross-reference
interchangeable
140C/LInterchangeable
interchangeable cross-reference
interchangeable
CM0305Interchangeable
interchangeable cross-reference
interchangeable
103152Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P5SR133SSW26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P5SR133SSW26?
P5SR133SSW26 is a BEARING,BALL,ANNULAR.
What parts can replace P5SR133SSW26?
There are 13 known substitutes for P5SR133SSW26: RC10BF152K, 304-00-005, 280-1145P79 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P5SR133SSW26?
P5SR133SSW26 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-218-0729. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P5SR133SSW26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026