PartsTable
Technical Data Sheet
Download PDF

P5801A — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P5801A: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 922 OVERALL, end_radius: 0.625 INCHES NOMINAL IN, fork_depth: 0.875 INCHES NOMINAL IN, hole_shape: ROUND, shank_length: 0.9375 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-414-9017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P5801A
NSN: 5340-01-414-9017
FSC: 5340 — Hardware, Commercial
CAGE: 70667 — ATLAS VALVE CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY 922 OVERALL
end_radius0.625 INCHES NOMINAL IN
fork_depth0.875 INCHES NOMINAL IN
hole_shapeROUND
shank_length0.9375 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.375 INCHES NOMINAL IN
overall_width0.875 INCHES NOMINAL IN
thread_length0.750 INCHES NOMINAL ROD CONNECTION IN
overall_height1.000 INCHES NOMINAL IN
shank_diameter0.750 INCHES NOMINAL IN
fork_span_width0.375 INCHES NOMINAL IN
NSN5340-01-414-9017
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P5801A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.750 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.375 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.250 INCHES NOMINAL IN
•
END RADIUS: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.9375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.750 INCHES NOMINAL IN
OVERALL HEIGHT1.000 INCHES NOMINAL IN
FORK SPAN WIDTH0.375 INCHES NOMINAL IN
FORK ARM THICKNESS0.250 INCHES NOMINAL IN
END RADIUS0.625 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.9375 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-16541 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.875 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3211804 PC 19Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P5801A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P5801A?
P5801A is a CLEVIS,ROD END.
What parts can replace P5801A?
There is 1 known substitute for P5801A: 3211804 PC 19. Substitute compatibility should be verified for your specific system.
What is the NSN for P5801A?
P5801A is cataloged in the U.S. Government catalog under NSN 5340-01-414-9017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P5801A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.