PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P562649
P562649 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MAGNET,PERMANENT is a the manufacturer industrial component. Key specifications include shape: CYLINDRICAL, face_size: 10.800, usage_design: USED TO REMOVE MAGNETIC PARTS FROM OIL IN A HYDR. RESERVOIR, overall_diameter: 0.630 INCHES NOMINAL IN, special_features: 5/8-18UNF EXTERNALLY THD.,ONE END FOR PLUG, end_item_identification: TEST CONSOLE,HFI AND P.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-252-3556, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P562649
NSN: 5340-01-252-3556
FSC: 5340
CAGE: 18265 — DONALDSON COMPANY, INC. (USA)
SPECIFICATIONS
shapeCYLINDRICAL
face_size10.800
usage_designUSED TO REMOVE MAGNETIC PARTS FROM OIL IN A HYDR. RESERVOIR
overall_diameter0.630 INCHES NOMINAL IN
special_features5/8-18UNF EXTERNALLY THD.,ONE END FOR PLUG
end_item_identificationTEST CONSOLE,HFI AND P
NSN5340-01-252-3556
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P562649 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FACE SIZE: 10.800
•
USAGE DESIGN: USED TO REMOVE MAGNETIC PARTS FROM OIL IN A HYDR. RESERVOIR
•
SHAPE: CYLINDRICAL
•
OVERALL DIAMETER: 0.630 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FACE SIZE10.800
USAGE DESIGNUSED TO REMOVE MAGNETIC PARTS FROM OIL IN A HYDR. RESERVOIR
SPECIAL FEATURES5/8-18UNF EXTERNALLY THD.,ONE END FOR PLUG
SHAPECYLINDRICAL
END ITEM IDENTIFICATIONTEST CONSOLE,HFI AND P
OVERALL DIAMETER0.630 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
M-11Upgraded Successor
successor cross-reference
successor
MEN'S SIZE-11Upgraded Successor
successor cross-reference
successor
92-8-3-78-LTUpgraded Successor
successor cross-reference
successor
8855800002-1Interchangeable
interchangeable cross-reference
interchangeable
SM-695AInterchangeable
interchangeable cross-reference
interchangeable
2004801Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P562649?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P562649?
P562649 is a MAGNET,PERMANENT.
What parts can replace P562649?
There are 22 known substitutes for P562649: M-11, MEN'S SIZE-11, 92-8-3-78-LT and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P562649?
P562649 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-252-3556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P562649

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026