PartsTable
Technical Data Sheet
Download PDF

P5300 — PRINTER,AUTOMATIC DATA PROCESSIN

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

P5300: PRINTER,AUTOMATIC DATA PROCESSIN.

PRINTER,AUTOMATIC DATA PROCESSIN. Key specifications include material: STEEL OVERALL, nut_style: SQUARE, nut_height: 0.188 INCHES NOMINAL IN, buffer_size: 8.0 KILOBYTES, unit_design: DESK TOP, printer_type: DOT MATRIX. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-208-1972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ P5300
NSN: 5310-00-208-1972
NIINs: 002081972, 013722177
FSC: 5310 — Nuts and Washers
CAGE: 18265 — DONALDSON COMPANY, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSQUARE
nut_height0.188 INCHES NOMINAL IN
buffer_size8.0 KILOBYTES
unit_designDESK TOP
printer_typeDOT MATRIX
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeFLAT
NSN5310-00-208-1972
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K P5300 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN P5300 MFR OEM
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.188 INCHES NOMINAL IN
•
NUT STYLE: SQUARE
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 20
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.188 INCHES NOMINAL IN
NUT STYLESQUARE
THREAD CLASS2B
THREAD QUANTITY PER INCH20
MATERIALSTEEL OVERALL
BEARING SURFACE TYPEFLAT
SUBSTITUTES & CROSS-REFERENCES 2
90970Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
XA2041Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy P5300?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P5300?
P5300 is a PRINTER,AUTOMATIC DATA PROCESSIN. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace P5300?
There are 2 known substitutes for P5300: 90970, XA2041. Substitute compatibility should be verified for your specific system.
What is the NSN for P5300?
P5300 is cataloged in the U.S. Government catalog under NSN 5310-00-208-1972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P5300

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.