PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P5168-7
P5168-7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include peripheral_diameter: 1.321 INCHES NOMINAL IN, center_hole_diameter: 0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM IN, cross-sectional_height: 0.150 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-006-4931, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P5168-7
NSN: 5330-01-006-4931
FSC: 5330
CAGE: 65035 — BOSCH REXROTH CORPORATION DIV BOSCH REXROTH (USA)
SPECIFICATIONS
peripheral_diameter1.321 INCHES NOMINAL IN
center_hole_diameter0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM IN
cross-sectional_height0.150 INCHES NOMINAL IN
NSN5330-01-006-4931
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P5168-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.150 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.321 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.150 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.321 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
51686Interchangeable
interchangeable cross-reference
interchangeable
10000-0101-01-2Interchangeable
interchangeable cross-reference
interchangeable
SC5985-0101-1Interchangeable
interchangeable cross-reference
interchangeable
1G51686Interchangeable
interchangeable cross-reference
interchangeable
58545Interchangeable
interchangeable cross-reference
interchangeable
6640NCM228453Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P5168-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P5168-7?
P5168-7 is a RETAINER,PACKING.
What parts can replace P5168-7?
There are 8 known substitutes for P5168-7: 51686, 10000-0101-01-2, SC5985-0101-1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P5168-7?
P5168-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-006-4931. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P5168-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026