PartsTable
Technical Data Sheet
Download PDF

P5140 — HOUSING,LIQUID PUMP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P5140: HOUSING,LIQUID PUMP.

The HOUSING,LIQUID PUMP is a the manufacturer industrial component. Key specifications include material: IRON CAST, design_type: FRICTION, overall_diameter: 0.440 INCHES NOMINAL IN, special_features: CASE,SCREWED, end_item_identification: 3895-01-331-8560,MIXER,ROTARY TILLER, pump_design_control_activity: 58923. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-100-6567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P5140
NSN: 5340-00-100-6567
NIINs: 001006567, 013406027
FSC: 5340 — Hardware, Commercial
CAGE: 51261 — CONTRAVES INC (USA)
SPECIFICATIONS
materialIRON CAST
design_typeFRICTION
overall_diameter0.440 INCHES NOMINAL IN
special_featuresCASE,SCREWED
end_item_identification3895-01-331-8560,MIXER,ROTARY TILLER
pump_design_control_activity58923
material_document_and_classificationMIL-P-22241, TYPE 2, GRADE A MIL SPEC SINGLE MATERIAL RESPONSE OR ZZ-R-765, CLASS 3, GRADE 50 FED SPEC SINGLE MATERIAL RESPONSE
pump_model_number_for_which_designed3635HBRV TYPE 3
opening_inside_diameter_for_which_designed0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
NSN5340-00-100-6567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P5140 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.440 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-22241, TYPE 2, GRADE A MIL SPEC SINGLE MATERIAL RESPONSE OR ZZ-R-765, CLASS 3, GRADE 50 FED SPEC SINGLE MATERIAL RESPONSE
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OR RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER0.440 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-22241, TYPE 2, GRADE A MIL SPEC SINGLE MATERIAL RESPONSE OR ZZ-R-765, CLASS 3, GRADE 50 FED SPEC SINGLE MATERIAL RESPONSE
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OR RUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
GP525BH1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy P5140?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P5140?
P5140 is a HOUSING,LIQUID PUMP.
What parts can replace P5140?
There is 1 known substitute for P5140: GP525BH1. Substitute compatibility should be verified for your specific system.
What is the NSN for P5140?
P5140 is cataloged in the U.S. Government catalog under NSN 5340-00-100-6567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P5140