PartsTable
Technical Data Sheet
Download PDF

P511202 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P511202: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, center_hole_diameter: 3.000 INCHES NOMINAL IN, end_item_identification: PUMP ASSY, RCIPG, flanged_body_outside_diameter: 3.750 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: PACKING; 4515 V?RING V. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-706-1023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P511202
NSN: 5330-01-706-1023
FSC: 5330 — Packing and Gasket Materials
CAGE: 71454 — FMC TECHNOLOGIES INC DBA FMC FLUID CONTROL (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
center_hole_diameter3.000 INCHES NOMINAL IN
end_item_identificationPUMP ASSY, RCIPG
flanged_body_outside_diameter3.750 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyPACKING; 4515 V?RING V
NSN5330-01-706-1023
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P511202 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGED BODY OUTSIDE DIAMETER: 3.750 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 3.000 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS
FLANGED BODY OUTSIDE DIAMETER3.750 INCHES NOMINAL IN
CENTER HOLE DIAMETER3.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING; 4515 V?RING V
END ITEM IDENTIFICATIONPUMP ASSY, RCIPG
MATERIALPLASTIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
P563662 REV D ITEM 35Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P563662Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P511202?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P511202?
P511202 is a PACKING,PREFORMED.
What parts can replace P511202?
There are 2 known substitutes for P511202: P563662 REV D ITEM 35, P563662. Substitute compatibility should be verified for your specific system.
What is the NSN for P511202?
P511202 is cataloged in the U.S. Government catalog under NSN 5330-01-706-1023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P511202

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.