PartsTable
Technical Data Sheet
Download PDF

P5008 — HOSE,AIR BREATHING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P5008: HOSE,AIR BREATHING.

The HOSE,AIR BREATHING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_length: 0.750 INCHES NOMINAL IN, wall_thickness: 0.109 INCHES NOMINAL0.109 INCHES NOMINAL IN, connection_type: FLANGE FIRST END, inside_diameter: 1.000 INCHES NOMINAL FIRST END IN, overall_diameter: 14.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-727-1730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P5008
NSN: 5340-00-727-1730
NIINs: 007271730, 011343603, 017176639
FSC: 5340 — Hardware, Commercial
CAGE: 65035 — BOSCH REXROTH CORPORATION DIV BOSCH REXROTH (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_length0.750 INCHES NOMINAL IN
wall_thickness0.109 INCHES NOMINAL0.109 INCHES NOMINAL IN
connection_typeFLANGE FIRST END
inside_diameter1.000 INCHES NOMINAL FIRST END IN
overall_diameter14.250 INCHES NOMINAL IN
special_featuresFOR LASER SAFETY COVER
style_designatorHELICALLY WOUND CONTINOUS WIRE SUPPORTED
features_providedOZONE RESISTANT
center_hole_diameter11.375 INCHES NOMINAL IN
fsc_application_dataRAMP AND STEERING CONTROL
base_material_thickness0.187 INCHES NOMINAL IN
NSN5340-00-727-1730
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P5008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: RAMP AND STEERING CONTROL
•
OVERALL DIAMETER: 14.250 INCHES NOMINAL IN
•
RECESS MAJOR INSIDE DIAMETER: 14.000 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 11.375 INCHES NOMINAL IN
•
BASE MATERIAL THICKNESS: 0.187 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATARAMP AND STEERING CONTROL
OVERALL DIAMETER14.250 INCHES NOMINAL IN
OVERALL LENGTH0.750 INCHES NOMINAL IN
RECESS MAJOR INSIDE DIAMETER14.000 INCHES NOMINAL IN
CENTER HOLE DIAMETER11.375 INCHES NOMINAL IN
BASE MATERIAL THICKNESS0.187 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P5008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P5008?
P5008 is a HOSE,AIR BREATHING.
What is the NSN for P5008?
P5008 is cataloged in the U.S. Government catalog under NSN 5340-00-727-1730. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P5008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.