PartsTable
Technical Data Sheet
PartsTable / O-RING / P50015-005
P50015-005 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, center_hole_diameter: 0.095 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-240-3392, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P50015-005
NSN: 5331-00-240-3392
FSC: 5331 — O-RING
CAGE: 52713 — PACIFIC PRECISION PRODUCTS MFG. DBA PACIFIC PRECISION PRODUCTS DIV ZODIAC PACIFIC PRECISION PRODUCTS (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
outside_diameter0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
center_hole_diameter0.095 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
nondefinitive_spec/std_data1 TYPE AND 1 CLASS
material_document_and_classificationMIL-R-83248,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-00-240-3392
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P50015-005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.095 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.095 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
AS568-005Interchangeable
interchangeable cross-reference
interchangeable
23516Interchangeable
interchangeable cross-reference
interchangeable
8005-366YInterchangeable
interchangeable cross-reference
interchangeable
283371-0003ITEM68Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-005Interchangeable
interchangeable cross-reference
interchangeable
01-463-2298Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P50015-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P50015-005?
P50015-005 is a O-RING.
What parts can replace P50015-005?
There are 13 known substitutes for P50015-005: AS568-005, 23516, 8005-366Y and 10 more. Substitute compatibility should be verified for your specific system.
Is P50015-005 still available?
P50015-005 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P50015-005

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026