PartsTable
Technical Data Sheet
Download PDF

P50012-203 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P50012-203: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, material_thickness: 0.020 INCHES NOMINAL IN, loop_inside_diameter: 0.312 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 0.488 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-972-8519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P50012-203
NSN: 5340-00-972-8519
FSC: 5340 — Hardware, Commercial
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter0.312 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.488 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
NSN5340-00-972-8519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P50012-203 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.488 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.199 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.488 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.312 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
115A032764Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P50012-203?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P50012-203?
P50012-203 is a CLAMP,LOOP.
What parts can replace P50012-203?
There is 1 known substitute for P50012-203: 115A032764. Substitute compatibility should be verified for your specific system.
What is the NSN for P50012-203?
P50012-203 is cataloged in the U.S. Government catalog under NSN 5340-00-972-8519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P50012-203

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.