P4MT4 — TEE,PIPE TO TUBE

✓ Government record, cited

— · HOSE FITTING

PRODUCT OVERVIEW

P4MT4: TEE,PIPE TO TUBE.

The TEE,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE OVERALL, leg_length: 0.109 INCHES NOMINAL SECOND END IN, connection_type: UNTHREADED INTERNAL TUBE FIRST END, connection_style: GRIPPING (HOSE) SECOND END, operating_pressure: 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, nominal_thread_size: 0.250 INCHES THIRD END IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-478-5776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

P4MT4

NSN: 4730-01-478-5776
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 61424 — PARKER-HANNIFIN CORP DIV PARFLEX DIVISION (USA)

SPECIFICATIONS

material	PLASTIC POLYPROPYLENE OVERALL
leg_length	0.109 INCHES NOMINAL SECOND END IN
connection_type	UNTHREADED INTERNAL TUBE FIRST END
connection_style	GRIPPING (HOSE) SECOND END
operating_pressure	300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size	0.250 INCHES THIRD END IN
maximum_operating_temp	212.0 FAHRENHEIT SINGLE RESPONSE DEGF
end_item_identification	PWEDG FOR NAVAL SHIPS
media_for_which_designed	WATER-OIL-GAS SINGLE RESPONSE
thread_series_designator	NPTF THIRD END
nominal_outside_diameter_tube_accommodated	0.250 INCHES SECOND END IN
tubing_wall_nominal_thickness_for_which_designed	0.060 INCHES SECOND END IN
NSN	4730-01-478-5776

COMPONENT DIAGRAM

KEY FEATURES

•

CONNECTION STYLE: PLAIN (PIPE) THIRD END

•

TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED: 0.060 INCHES SECOND END IN

•

CONNECTION TYPE: UNTHREADED INTERNAL TUBE FIRST END

TECHNICAL CHARACTERISTICS

CONNECTION STYLE	PLAIN (PIPE) THIRD END
CONNECTION STYLE	GRIPPING (HOSE) FIRST END
CONNECTION STYLE	GRIPPING (HOSE) SECOND END
TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED	0.060 INCHES SECOND END IN
TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED	0.060 INCHES FIRST END IN
CONNECTION TYPE	UNTHREADED INTERNAL TUBE FIRST END
CONNECTION TYPE	THREADED EXTERNAL PIPE THIRD END
CONNECTION TYPE	UNTHREADED INTERNAL TUBE SECOND END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED	0.250 INCHES FIRST END IN
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED	0.250 INCHES SECOND END IN

SUBSTITUTES & CROSS-REFERENCES 3

0192-4Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

03Y61TM-0192-4Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

03Y61TM-0192 FIND NO 4Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy P4MT4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is P4MT4?

P4MT4 is a TEE,PIPE TO TUBE.

What parts can replace P4MT4?

There are 3 known substitutes for P4MT4: 0192-4, 03Y61TM-0192-4, 03Y61TM-0192 FIND NO 4. Substitute compatibility should be verified for your specific system.

What is the NSN for P4MT4?

P4MT4 is cataloged in the U.S. Government catalog under NSN 4730-01-478-5776. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

P4MT4 — TEE,PIPE TO TUBE

Request a Quote — P4MT4