PartsTable
Technical Data Sheet
Download PDF

P49883-2 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

P49883-2: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include height: 0.030 INCHES NOMINAL IN, diameter: 0.099 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN, material: STEEL COMP 1070 OVERALL, head_style: FLAT, point_shape: CONICAL, overall_length: 30.000 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-290-4085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P49883-2
NSN: 3110-01-290-4085
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 56607 — LEXAIR INC (USA)
SPECIFICATIONS
height0.030 INCHES NOMINAL IN
diameter0.099 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
materialSTEEL COMP 1070 OVERALL
head_styleFLAT
point_shapeCONICAL
overall_length30.000 INCHES IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
section_quantity1
special_featuresVARIABLE-SPEED FOOTSWITCH TO USE WITH THE STERNAL SAW POWER UNIT (NSN:6515-01-503-9445), IN OPEN HEART SURGERY; PART OF THE 115V STERNAL SAW II SYSTEM V
style_designatorSTRAIGHT
pin_head_diameter0.125 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
NSN3110-01-290-4085
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: P49883-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 4
156/75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X5008/12/156 ITEM 75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X5008/12/156/75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
156 ITEM 75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P49883-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P49883-2?
P49883-2 is a BEARING,BALL,ANNULAR.
What parts can replace P49883-2?
There are 4 known substitutes for P49883-2: 156/75, X5008/12/156 ITEM 75, X5008/12/156/75 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P49883-2?
P49883-2 is cataloged in the U.S. Government catalog under NSN 3110-01-290-4085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P49883-2