PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P46155
P46155 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_width: 2.938 INCHES NOMINAL IN, overall_length: 4.875 INCHES NOMINAL IN, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-108-1119, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P46155
NSN: 5330-00-108-1119
FSC: 5330
CAGE: 18925 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV PNEUMATIC DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_width2.938 INCHES NOMINAL IN
overall_length4.875 INCHES NOMINAL IN
hardness_rating75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
NSN5330-00-108-1119
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P46155 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
OVERALL LENGTH4.875 INCHES NOMINAL IN
OVERALL WIDTH2.938 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
120 55/64Interchangeable
interchangeable cross-reference
interchangeable
2411 55/64Interchangeable
interchangeable cross-reference
interchangeable
49755Interchangeable
interchangeable cross-reference
interchangeable
40595Interchangeable
interchangeable cross-reference
interchangeable
FWG08-0023Interchangeable
interchangeable cross-reference
interchangeable
A46155Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P46155?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P46155?
P46155 is a GASKET.
What parts can replace P46155?
There are 10 known substitutes for P46155: 120 55/64, 2411 55/64, 49755 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P46155?
P46155 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-108-1119. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P46155

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026