PartsTable
Technical Data Sheet
Download PDF

P40747 — NUT,PLAIN,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P40747: NUT,PLAIN,SPLINE.

The NUT,PLAIN,SPLINE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE OVERALL, nut_height: 0.370 INCHES NOMINAL IN, nut_diameter: 0.840 INCHES NOMINAL IN, pilot_length: 0.345 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-335-7082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P40747
NSN: 5310-01-335-7082
FSC: 5310 — Nuts and Washers
CAGE: 1YHH8 — JLG INDUSTRIES, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE OVERALL
nut_height0.370 INCHES NOMINAL IN
nut_diameter0.840 INCHES NOMINAL IN
pilot_length0.345 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
nominal_thread_size0.375 INCHES IN
drilled_hole_diameter0.040 INCHES NOMINAL IN
hole_type_and_quantity6 DRILLED
hole_configuration_styleCONFIGURATION F
thread_quantity_per_inch24
NSN5310-01-335-7082
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P40747 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION F
•
MATERIAL DOCUMENT AND CLASSIFICATION: 46062,CAGEC 57733 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT DIAMETER: 0.840 INCHES NOMINAL IN
•
PILOT LENGTH: 0.345 INCHES NOMINAL IN
•
NUT HEIGHT: 0.370 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION F
MATERIAL DOCUMENT AND CLASSIFICATION46062,CAGEC 57733 MFR REF SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT DIAMETER0.840 INCHES NOMINAL IN
PILOT LENGTH0.345 INCHES NOMINAL IN
NUT HEIGHT0.370 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.040 INCHES NOMINAL IN
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 1
73732Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P40747?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P40747?
P40747 is a NUT,PLAIN,SPLINE.
What parts can replace P40747?
There is 1 known substitute for P40747: 73732. Substitute compatibility should be verified for your specific system.
What is the NSN for P40747?
P40747 is cataloged in the U.S. Government catalog under NSN 5310-01-335-7082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P40747

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.