PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P406
P406 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RECEIVER SUBASSEMBLY,RADIO is a the manufacturer industrial component. Key specifications include material: STEEL, design_type: STRAIGHT, inclosure_type: FULLY INCLOSED, overall_length: 0.375 INCHES NOMINAL IN, special_features: W/7760599 AND 7760598 CONNECTOR ASSY, body_inside_diameter: 0.3125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-230-9806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P406
NSN: 5330-00-230-9806
FSC: 5330
CAGE: 9Z270 — WELDON PUMP LLC (USA)
SPECIFICATIONS
materialSTEEL
design_typeSTRAIGHT
inclosure_typeFULLY INCLOSED
overall_length0.375 INCHES NOMINAL IN
special_featuresW/7760599 AND 7760598 CONNECTOR ASSY
body_inside_diameter0.3125 INCHES NOMINAL IN
body_outside_diameter0.6250 INCHES NOMINAL IN
terminal_type_and_quantity2 WIRE LEAD
nonpile-up_contact_arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
maximum_voltage_rating_in_volts30.0 DC
general_characteristics_item_descriptionSTAINLESS STEEL,0.625 IN. DIA; 0.152 IN. THK IN
contact_load_current_rating_at_maximum_rated_voltage10.000 AMPERES RESISTIVE DC
NSN5330-00-230-9806
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P406 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STAINLESS STEEL,0.625 IN. DIA; 0.152 IN. THK IN
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONSTAINLESS STEEL,0.625 IN. DIA; 0.152 IN. THK IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
A33514Interchangeable
interchangeable cross-reference
interchangeable
C1001-502Interchangeable
interchangeable cross-reference
interchangeable
X333Interchangeable
interchangeable cross-reference
interchangeable
P-40-6Interchangeable
interchangeable cross-reference
interchangeable
B-94.33 P-40-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P406?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P406?
P406 is a RECEIVER SUBASSEMBLY,RADIO.
What parts can replace P406?
There are 5 known substitutes for P406: A33514, C1001-502, X333 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P406?
P406 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-230-9806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P406

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026