PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P40071
P40071 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.980 INCHES NOMINAL IN, length: 1.000 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), special_features: COLOR BLACK, loop/holding_dimension: 0.375 INCHES NOMINAL IN, loop/holding_smaller_dimension: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-341-9225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P40071
NSN: 5340-01-341-9225
FSC: 5340
CAGE: 1YHH8 — JLG INDUSTRIES, INC. (USA)
SPECIFICATIONS
width0.980 INCHES NOMINAL IN
length1.000 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_featuresCOLOR BLACK
loop/holding_dimension0.375 INCHES NOMINAL IN
loop/holding_smaller_dimension0.312 INCHES NOMINAL IN
NSN5340-01-341-9225
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P40071 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING SMALLER DIMENSION: 0.312 INCHES NOMINAL IN
•
WIDTH: 0.980 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
LENGTH: 1.000 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP/HOLDING SMALLER DIMENSION0.312 INCHES NOMINAL IN
WIDTH0.980 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR BLACK
MOUNTING METHODUNTHREADED HOLE(S)
LENGTH1.000 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
T-8Upgraded Successor
successor cross-reference
successor
M5501/7-F4Upgraded Successor
successor cross-reference
successor
N02SERIES-TUpgraded Successor
successor cross-reference
successor
WF791Interchangeable
interchangeable cross-reference
interchangeable
AA55473Interchangeable
interchangeable cross-reference
interchangeable
AA55473-29Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P40071?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P40071?
P40071 is a CLIP,SPRING TENSION.
What parts can replace P40071?
There are 12 known substitutes for P40071: T-8, M5501/7-F4, N02SERIES-T and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P40071?
P40071 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-341-9225. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P40071

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026