PartsTable
Technical Data Sheet
Download PDF

P400-1 — P400-1

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

P400-1: P400-1.

The P400-1 is a the manufacturer industrial component. Key specifications include length: 20.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY, jaw_width: 0.625 INCHES NOMINAL IN, bonnet_type: INSIDE SCREW, movement_type: MOVING COIL, PERMANENT MAGNET, overall_width: 7.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 9520-00-075-9817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ P400-1
NSN: 9520-00-075-9817
NIINs: 000759817, 002555841, 008114117, 009335748, 011319266, 011758045
FSC: 9520 — Structural Shapes
CAGE: 96195 — UNISTRUT INTERNATIONAL CORPORATION DBA UNISTRUT DIVERSIFIED PRODUCTS (USA)
SPECIFICATIONS
length20.000 FEET MAXIMUM FT
materialALUMINUM ALLOY
jaw_width0.625 INCHES NOMINAL IN
bonnet_typeINSIDE SCREW
movement_typeMOVING COIL, PERMANENT MAGNET
overall_width7.875 INCHES NOMINAL IN
pointer_colorBLACK SINGLE INDICATOR SINGLE RANGE
indicator_typeDIAL W/POINTER
overall_height0.166 INCHES NOMINAL IN
overall_length2.375 INCHES NOMINAL IN
connection_typeTHREADED INTERNAL PIPE ALL ENDS
connection_stylePLAIN,OPTIONAL END(PIPE) ALL ENDS
NSN9520-00-075-9817
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available P400-1 TITLE COMPONENT PN P400-1 MFR P400-1
KEY FEATURES
•
RIGHT SIDE TOP FLANGE WIDTH: 0.375 INCHES NOMINAL IN
•
LENGTH: 20.000 FEET MAXIMUM FT
•
BASE FLANGE THICKNESS: 0.055 INCHES NOMINAL IN
•
LEFT SIDE FLANGE HEIGHT: 0.812 INCHES NOMINAL IN
•
RIGHT SIDE FLANGE HEIGHT: 0.812 INCHES NOMINAL IN
•
LEFT SIDE TOP FLANGE WIDTH: 0.375 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
RIGHT SIDE TOP FLANGE WIDTH0.375 INCHES NOMINAL IN
LENGTH20.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS0.055 INCHES NOMINAL IN
LEFT SIDE FLANGE HEIGHT0.812 INCHES NOMINAL IN
OVERALL WIDTH1.625 INCHES NOMINAL IN
RIGHT SIDE FLANGE HEIGHT0.812 INCHES NOMINAL IN
LEFT SIDE TOP FLANGE WIDTH0.375 INCHES NOMINAL IN
MATERIALSTEEL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY LENGTH REQUIREMENTS
SUBSTITUTES & CROSS-REFERENCES 2
PS511Reference document
Same NSN cross-reference
Reference document — Secondary reference
W-401 PG10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy P400-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P400-1?
P400-1 is a P400-1. It is classified as a MRO (MRO_GENERAL).
What parts can replace P400-1?
There are 2 known substitutes for P400-1: PS511, W-401 PG10. Substitute compatibility should be verified for your specific system.
What is the NSN for P400-1?
P400-1 is cataloged in the U.S. Government catalog under NSN 9520-00-075-9817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P400-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.