PartsTable
Technical Data Sheet
Download PDF

P384 — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

P384: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: OIL LUBRICATING LUBRICATION, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 1.875 INCHES NOMINAL IN, corner_shape: SQUARE ALL CORNERS, body_diameter: 0.562 INCHES NOMINAL IN, hole_diameter: 0.2812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-761-3305, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ P384
NSN: 5330-00-761-3305
NIINs: 007613305, 009370163, 009583167
FSC: 5330 — Packing and Gasket Materials
CAGE: 9Z270 — WELDON PUMP LLC (USA)
SPECIFICATIONS
materialOIL LUBRICATING LUBRICATION
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length1.875 INCHES NOMINAL IN
corner_shapeSQUARE ALL CORNERS
body_diameter0.562 INCHES NOMINAL IN
hole_diameter0.2812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.875 INCHES NOMINAL IN
overall_length0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL
terminal_length1.500 INCHES MINIMUM IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
aperture_diameter1.5625 INCHES NOMINAL IN
NSN5330-00-761-3305
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P384 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.01562 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96,CL A FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.5625 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.01562 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96,CL A FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH1.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.875 INCHES NOMINAL IN
APERTURE DIAMETER1.5625 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.4376 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.4376 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy P384?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P384?
P384 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).
What is the NSN for P384?
P384 is cataloged in the U.S. Government catalog under NSN 5330-00-761-3305. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P384

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.