PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P342-0051-000
P342-0051-000 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.825 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-763-7828, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P342-0051-000
NSN: 5305-00-763-7828
FSC: 5305
CAGE: 77250 — ALLIED PRODUCTS CORP PHEOLL MFG CO DIV (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.825 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.875 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-763-7828
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: P342-0051-000 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW SURFACE TREATMENT: PASSIVATE
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
THREAD LENGTH: 0.825 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
SCREW SURFACE TREATMENTPASSIVATE
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD LENGTH0.825 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
2222-9Interchangeable
interchangeable cross-reference
interchangeable
1656Interchangeable
interchangeable cross-reference
interchangeable
C600012890Interchangeable
interchangeable cross-reference
interchangeable
26083Interchangeable
interchangeable cross-reference
interchangeable
533.5000Interchangeable
interchangeable cross-reference
interchangeable
20032Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P342-0051-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P342-0051-000?
P342-0051-000 is a SCREW,MACHINE.
What parts can replace P342-0051-000?
There are 23 known substitutes for P342-0051-000: 2222-9, 1656, C600012890 and 20 more. Substitute compatibility should be verified for your specific system.
Is P342-0051-000 still available?
P342-0051-000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P342-0051-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026