PartsTable / O-RING / P33367
P33367
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.558 INCHES NOMINAL IN, center_hole_diameter: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-492-2070, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
P33367
NSN: 5331-00-492-2070 FSC: 5331 — O-RINGCAGE: U1604 — MARTIN-BAKER AIRCRAFT COMPANY LIMITED (GBR)
SPECIFICATIONS
material RUBBER FLUOROSILICONE CLASS FQ hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 0.558 INCHES NOMINAL IN center_hole_diameter 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN NSN 5331-00-492-2070
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: P33367
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
• CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• CENTER HOLE DIAMETER: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.558 INCHES NOMINAL IN
• ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER FLUOROSILICONE CLASS FQ CROSS-SECTIONAL HEIGHT 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL CENTER HOLE DIAMETER 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.558 INCHES NOMINAL IN ELONGATION PERCENTAGE 125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
180038 Interchangeable interchangeable cross-reference
interchangeable
340595 Interchangeable interchangeable cross-reference
interchangeable
035001 Interchangeable interchangeable cross-reference
interchangeable
MN1202C Interchangeable interchangeable cross-reference
interchangeable
N1202C Interchangeable interchangeable cross-reference
interchangeable
MS35746-1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy P33367?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P33367?
P33367 is a O-RING.
What parts can replace P33367?
There are 13 known substitutes for P33367: 180038, 340595, 035001 and 10 more. Substitute compatibility should be verified for your specific system.
Is P33367 still available?
P33367 is currently cancelled.