PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P330-2290-00
P330-2290-00 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.250 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-685-1490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P330-2290-00
NSN: 5305-00-685-1490
FSC: 5305
CAGE: 77250 — ALLIED PRODUCTS CORP PHEOLL MFG CO DIV (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.250 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch40
NSN5305-00-685-1490
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: P330-2290-00 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD LENGTH: 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
SCREW SURFACE TREATMENT: PASSIVATE
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.250 INCHES NOMINAL IN
HEAD STYLEFLAT COUNTERSUNK
THREAD LENGTH0.250 INCHES MAXIMUM IN
SCREW MATERIALSTEEL CORROSION RESISTING
SCREW SURFACE TREATMENTPASSIVATE
NOMINAL THREAD DIAMETER0.112 INCHES IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH40
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
245122Interchangeable
interchangeable cross-reference
interchangeable
FF-S-92 TY-1 ST Y-2SInterchangeable
interchangeable cross-reference
interchangeable
MS35200-12Interchangeable
interchangeable cross-reference
interchangeable
330-2290-000Interchangeable
Same NIIN cross-reference
interchangeable
P330-2290-000Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P330-2290-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P330-2290-00?
P330-2290-00 is a SCREW,MACHINE.
What parts can replace P330-2290-00?
There are 5 known substitutes for P330-2290-00: 245122, FF-S-92 TY-1 ST Y-2S, MS35200-12 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P330-2290-00?
P330-2290-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-685-1490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P330-2290-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026