PartsTable
Technical Data Sheet
Download PDF

P33-3 — O-RING

✓ Government record, cited
Motorola · ORING SEAL
PRODUCT OVERVIEW

P33-3: O-RING.

The Motorola P333 charger connects directly into the phone using the micro-usb connector. The charger enables the use of the phone with a completely discharged battery but does not power the phone without a battery. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-781-4252, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P33-3
NSN: 5331-00-781-4252
NIINs: 007814252, 017338980
FSC: 5331 — O-ring
CAGE: 92863 — MARVEL ENGINEERING COMPANY INC (USA)
SPECIFICATIONS
phaseTHREE
materialRUBBER SYNTHETIC
overall_width760.0 MILLIMETERS NOMINAL MM
overall_height1231.0 MILLIMETERS NOMINAL MM
overall_length1570.0 MILLIMETERS NOMINAL MM
frequency_rating50.0 HERTZ NOMINAL
special_featuresMINIMUM RATING 30KVA/24KW
dc_voltage_rating12.0 VOLTS NOMINAL
center_hole_diameter5.714 INCHES MINIMUM AND 5.730 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
unpackaged_unit_weight660.0 KILOGRAMS NOMINAL KG
line_to_line_voltage_in_volts400.0
NSN5331-00-781-4252
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P33-3 MFR: Motorola ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 5.714 INCHES MINIMUM AND 5.730 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER5.714 INCHES MINIMUM AND 5.730 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P33-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P33-3?
P33-3 is a O-RING manufactured by Motorola.
What is the NSN for P33-3?
P33-3 is cataloged in the U.S. Government catalog under NSN 5331-00-781-4252. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P33-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.