PartsTable
Technical Data Sheet
Download PDF

P32763 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P32763: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: CHAMFERED, pin_overall_length: 3.375 INCHES MINIMUM AND 3.395 INCHES MAXIMUM IN, first_hole_diameter: 0.172 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-253-4142, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P32763
NSN: 5315-00-253-4142
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
hardness_rating30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleCHAMFERED
pin_overall_length3.375 INCHES MINIMUM AND 3.395 INCHES MAXIMUM IN
first_hole_diameter0.172 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
pin_overall_diameter0.6130 INCHES MINIMUM AND 0.6170 INCHES MAXIMUM IN
second_hole_diameter0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
hole_arrangement_styleBOTH END DRILLED
second_end_taper_angle28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
NSN5315-00-253-4142
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P32763 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
SECOND END TAPER ANGLE: 28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.172 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SECOND END TAPER LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
SECOND END TAPER ANGLE28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.172 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SECOND END TAPER LENGTH0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.6130 INCHES MINIMUM AND 0.6170 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P32763?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P32763?
P32763 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for P32763?
P32763 is cataloged in the U.S. Government catalog under NSN 5315-00-253-4142. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P32763

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.