PartsTable
Technical Data Sheet
Download PDF

P313-0156-000 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P313-0156-000: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-208-7021, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P313-0156-000
NSN: 5310-00-208-7021
NIINs: 002087021, 002686116
FSC: 5310 — Nuts and Washers
CAGE: 77250 — ALLIED PRODUCTS CORP PHEOLL MFG CO DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleHEXAGON
nut_height0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentNICKEL OVERALL
width_across_flats0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
nominal_thread_size0.112 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch40
NSN5310-00-208-7021
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P313-0156-000 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT HEIGHT: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.188 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT HEIGHT0.062 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH40
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
313-0156-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
P313-0156-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy P313-0156-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P313-0156-000?
P313-0156-000 is a NUT,PLAIN,HEXAGON.
What parts can replace P313-0156-000?
There are 2 known substitutes for P313-0156-000: 313-0156-000, P313-0156-00. Substitute compatibility should be verified for your specific system.
What is the NSN for P313-0156-000?
P313-0156-000 is cataloged in the U.S. Government catalog under NSN 5310-00-208-7021. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P313-0156-000