PartsTable / COMPONENT / P31100
P31100
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_diameter: 0.670 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN, special_features: YELLOW, inside_diameter_length: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-324-9158, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
P31100
NSN: 5340-00-324-9158 FSC: 5340 CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
material PLASTIC, POLYETHYLENE (PP) design_type FRICTION overall_diameter 0.670 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN special_features YELLOW inside_diameter_length 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN round_cap_outside_surface_condition SMOOTH material_document_and_classification L-P-390, TYPE 1, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE tube_outside_diameter_for_which_designed 0.403 INCHES MINIMUM AND 0.423 INCHES MAXIMUM IN NSN 5340-00-324-9158
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: P31100
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
• MATERIAL: PLASTIC, POLYETHYLENE (PP)
• MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
• INSIDE DIAMETER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
• OVERALL DIAMETER: 0.670 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN
• TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.403 INCHES MINIMUM AND 0.423 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ROUND CAP OUTSIDE SURFACE CONDITION SMOOTH MATERIAL PLASTIC, POLYETHYLENE (PP) MATERIAL DOCUMENT AND CLASSIFICATION L-P-390, TYPE 1, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER LENGTH 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN DESIGN TYPE FRICTION SPECIAL FEATURES YELLOW OVERALL DIAMETER 0.670 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED 0.403 INCHES MINIMUM AND 0.423 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
HYDRO-SLINT Upgraded Successor successor cross-reference
successor
E-2 Upgraded Successor successor cross-reference
successor
EP-8 Upgraded Successor successor cross-reference
successor
6971-0014 Upgraded Successor successor cross-reference
successor
MS90376-12RB Upgraded Successor successor cross-reference
successor
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy P31100?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P31100?
P31100 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace P31100?
There are 16 known substitutes for P31100: HYDRO-SLINT, E-2, EP-8 and 13 more. Substitute compatibility should be verified for your specific system.
Is P31100 still available?
P31100 is currently cancelled.