PartsTable
Technical Data Sheet

P3 1/4-45G — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

P3 1/4-45G: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include material: STEEL EJECTOR SPRING, head_length: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, eyelet_length: 0.136 INCHES NOMINAL IN, stud_diameter: 0.193 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN, stud_head_height: 0.305 INCHES NOMINAL IN, surface_treatment: PAINT OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5325-01-022-3881, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P3 1/4-45G
NSN: 5325-01-022-3881
FSC: 5325 — Fastening Devices
CAGE: 72794 — SOUTHCO INC (USA)
SPECIFICATIONS
materialSTEEL EJECTOR SPRING
head_length0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
eyelet_length0.136 INCHES NOMINAL IN
stud_diameter0.193 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
stud_head_height0.305 INCHES NOMINAL IN
surface_treatmentPAINT OVERALL
stud_assembly_styleSTUD ASSEMBLY
securing_device_typeSPRING
eyelet_outside_diameter0.282 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
turnlock_stud_head_styleSTUD HEAD
material_accommodated_thickness0.125 INCHES NOMINAL IN
material_document_and_classificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE RECEPTACLE
NSN5325-01-022-3881
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: P3 1/4-45G · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD LENGTH: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
EYELET OUTSIDE DIAMETER: 0.282 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
•
STUD HEAD HEIGHT: 0.305 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: SPRING
TECHNICAL CHARACTERISTICS
HEAD LENGTH0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
EYELET OUTSIDE DIAMETER0.282 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
MATERIAL ACCOMMODATED THICKNESS0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE STUD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE RECEPTACLE
STUD HEAD HEIGHT0.305 INCHES NOMINAL IN
SECURING DEVICE TYPESPRING
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.363 INCHES NOMINAL IN
TURNLOCK STUD HEAD STYLESTUD HEAD
OTHER ITEMS IN FSC 5325 — Fastening Devices
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317
SUBSTITUTES & CROSS-REFERENCES 4
P3 1/4-45EPGReference document
Same NSN cross-reference
Reference document — Secondary reference
BACS21DD1GSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P325-45SEGReference document
Same NSN cross-reference
Reference document — Secondary reference
DB1400-6-A-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P3 1/4-45G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P3 1/4-45G?
P3 1/4-45G is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace P3 1/4-45G?
There are 4 known substitutes for P3 1/4-45G: P3 1/4-45EPG, BACS21DD1G, P325-45SEG and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P3 1/4-45G?
P3 1/4-45G is cataloged in the U.S. Government catalog under NSN 5325-01-022-3881. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P3 1/4-45G