PartsTable
Technical Data Sheet
Download PDF

P24K — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P24K: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1025 OVERALL, end_radius: 0.531 INCHES NOMINAL IN, fork_depth: 3.250 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.499 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN, overall_width: 1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-276-5814, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P24K
NSN: 5340-00-276-5814
FSC: 5340 — Hardware, Commercial
CAGE: 29690 — CORRECT MFG CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1025 OVERALL
end_radius0.531 INCHES NOMINAL IN
fork_depth3.250 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter0.499 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
overall_width1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM IN
thread_length1.219 INCHES NOMINAL ROD CONNECTION IN
shank_diameter1.062 INCHES NOMINAL IN
fork_span_width0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
NSN5340-00-276-5814
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P24K MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.062 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
•
END RADIUS: 0.531 INCHES NOMINAL IN
•
THREAD LENGTH: 1.219 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.062 INCHES NOMINAL IN
FORK SPAN WIDTH0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
FORK ARM THICKNESS0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
END RADIUS0.531 INCHES NOMINAL IN
THREAD LENGTH1.219 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.625 INCHES ROD CONNECTION IN
SUBSTITUTES & CROSS-REFERENCES 3
2708-7B 5/8-18Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2708-7BReference document
Same NSN cross-reference
Reference document — Secondary reference
CHC2708-7BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P24K?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P24K?
P24K is a CLEVIS,ROD END.
What parts can replace P24K?
There are 3 known substitutes for P24K: 2708-7B 5/8-18, 2708-7B, CHC2708-7B. Substitute compatibility should be verified for your specific system.
What is the NSN for P24K?
P24K is cataloged in the U.S. Government catalog under NSN 5340-00-276-5814. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P24K

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.