PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P2325
P2325 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 1.625 INCHES NOMINAL IN, overall_length: 5.250 INCHES NOMINAL IN, style_designator: RECTANGULAR, material_thickness: 0.250 INCHES NOMINAL IN, mounting_hole_diameter: 0.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-612-2897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P2325
NSN: 5340-00-612-2897
FSC: 5340
CAGE: 96195 — UNISTRUT INTERNATIONAL CORPORATION DBA UNISTRUT DIVERSIFIED PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL
overall_width1.625 INCHES NOMINAL IN
overall_length5.250 INCHES NOMINAL IN
style_designatorRECTANGULAR
material_thickness0.250 INCHES NOMINAL IN
mounting_hole_diameter0.562 INCHES NOMINAL IN
NSN5340-00-612-2897
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P2325 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE DIAMETER0.562 INCHES NOMINAL IN
OVERALL WIDTH1.625 INCHES NOMINAL IN
OVERALL LENGTH5.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
NY34PCS3340Interchangeable
interchangeable cross-reference
interchangeable
NY121PCS3340Interchangeable
interchangeable cross-reference
interchangeable
X204Interchangeable
interchangeable cross-reference
interchangeable
X-240Interchangeable
interchangeable cross-reference
interchangeable
970285-0403Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P2325?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P2325?
P2325 is a PLATE,MENDING.
What parts can replace P2325?
There are 5 known substitutes for P2325: NY34PCS3340, NY121PCS3340, X204 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P2325?
P2325 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-612-2897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P2325

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026