PartsTable
Technical Data Sheet
Download PDF

P209119N — GEAR,HELICAL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

P209119N: GEAR,HELICAL.

The GEAR,HELICAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OVERALL, bore_style: INVOLUTE SPLINE BOTH ENDS, teeth_type: SINGLE HELIX, helix_angle: 28.6166 DEGREES, pitch_diameter: 24.8030 INCHES NOMINAL IN, pressure_angle: 17.5000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-179-5548, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P209119N
NSN: 3020-01-179-5548
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 7PZX0 — FAIRBANKS MORSE, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OVERALL
bore_styleINVOLUTE SPLINE BOTH ENDS
teeth_typeSINGLE HELIX
helix_angle28.6166 DEGREES
pitch_diameter24.8030 INCHES NOMINAL IN
pressure_angle17.5000 DEGREES
teeth_quantity105
hardness_rating50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
style_designatorHUBLESS, RECESSED BODY
face_nominal_width4.724 INCHES IN
bore_nominal_diameter7.638 INCHES BOTH ENDS IN
nominal_outside_diameter25.197 INCHES IN
NSN3020-01-179-5548
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,HELICAL TITLE COMPONENT PN P209119N MFR GEAR,HELICAL
KEY FEATURES
•
BORE NOMINAL DIAMETER: 7.638 INCHES BOTH ENDS IN
•
HELIX ANGLE: 28.6166 DEGREES
•
TEETH QUANTITY: 105
•
BORE STYLE: INVOLUTE SPLINE BOTH ENDS
•
TEETH TYPE: SINGLE HELIX
•
HARDNESS RATING: 50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: HUBLESS, RECESSED BODY
•
PITCH DIAMETER: 24.8030 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER7.638 INCHES BOTH ENDS IN
HELIX ANGLE28.6166 DEGREES
TEETH QUANTITY105
BORE STYLEINVOLUTE SPLINE BOTH ENDS
TEETH TYPESINGLE HELIX
HARDNESS RATING50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORHUBLESS, RECESSED BODY
PITCH DIAMETER24.8030 INCHES NOMINAL IN
NOMINAL OUTSIDE DIAMETER25.197 INCHES IN
PRESSURE ANGLE17.5000 DEGREES
OTHER ITEMS IN FSC 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3020-00-000-0091 3020-00-001-0027 3020-00-001-0028 3020-00-001-0063 3020-00-001-0064 3020-00-001-0066 3020-00-001-0071 3020-00-001-0072
SUBSTITUTES & CROSS-REFERENCES 1
P209119Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P209119N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P209119N?
P209119N is a GEAR,HELICAL.
What parts can replace P209119N?
There is 1 known substitute for P209119N: P209119. Substitute compatibility should be verified for your specific system.
What is the NSN for P209119N?
P209119N is cataloged in the U.S. Government catalog under NSN 3020-01-179-5548. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P209119N