PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P2046-2
P2046-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL, fsc_application_data: ALTIMETER,PRESSURIZED COMPARTMENT, maximum_pressure_rating: 1000.0 POUNDS PER SQUARE INCH (PSI) LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-526-6197, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P2046-2
NSN: 5330-00-526-6197
FSC: 5330
CAGE: 98810 — AEROSONIC LLC (USA)
SPECIFICATIONS
materialRUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
fsc_application_dataALTIMETER,PRESSURIZED COMPARTMENT
maximum_pressure_rating1000.0 POUNDS PER SQUARE INCH (PSI) LBS
NSN5330-00-526-6197
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P2046-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MAXIMUM PRESSURE RATING: 1000.0 POUNDS PER SQUARE INCH (PSI) LBS
•
FSC APPLICATION DATA: ALTIMETER,PRESSURIZED COMPARTMENT
•
MATERIAL: RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM PRESSURE RATING1000.0 POUNDS PER SQUARE INCH (PSI) LBS
FSC APPLICATION DATAALTIMETER,PRESSURIZED COMPARTMENT
MATERIALRUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
20462Interchangeable
interchangeable cross-reference
interchangeable
313-032Interchangeable
interchangeable cross-reference
interchangeable
93661Interchangeable
interchangeable cross-reference
interchangeable
BA109653Interchangeable
interchangeable cross-reference
interchangeable
D166539Interchangeable
interchangeable cross-reference
interchangeable
P2046Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P2046-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P2046-2?
P2046-2 is a GASKET.
What parts can replace P2046-2?
There are 8 known substitutes for P2046-2: 20462, 313-032, 93661 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P2046-2?
P2046-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-526-6197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P2046-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026