PartsTable
Technical Data Sheet
Download PDF

P192 — BUSHING,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P192: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 841 OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.609 INCHES NOMINAL IN, corner_shape: SQUARE ALL CORNERS, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-021-8512, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P192
NSN: 5310-00-021-8512
NIINs: 000218512, 012191872
FSC: 5310 — Nuts and Washers
CAGE: 80212 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
materialCOPPER ALLOY 841 OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.609 INCHES NOMINAL IN
corner_shapeSQUARE ALL CORNERS
thread_class2B
thread_seriesUNF
overall_length0.2500 INCHES NOMINAL IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
thread_directionRIGHT-HAND
width_across_flats1.062 INCHES NOMINAL IN
nominal_thread_size0.625 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
NSN5310-00-021-8512
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P192 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.062 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT HEIGHT: 0.609 INCHES NOMINAL IN
•
NUT STYLE: SLOTTED, HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.062 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT HEIGHT0.609 INCHES NOMINAL IN
NUT STYLESLOTTED, HEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH18
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
218512Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy P192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P192?
P192 is a BUSHING,SLEEVE.
What parts can replace P192?
There is 1 known substitute for P192: 218512. Substitute compatibility should be verified for your specific system.
What is the NSN for P192?
P192 is cataloged in the U.S. Government catalog under NSN 5310-00-021-8512. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P192

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.