PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P18318
P18318 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL BALL, alignment_type: RIGID, surface_finish: GROUND, special_features: BIT FOR HEXAGON, 2MM, 1/4 INCH TOOL FOR VXE30 MM, part_name_assigned_by_controlling_agency: BIT FOR HEXAGON, 2MM, 1/4 INCH MM, thrust_directional_capability_designation: SINGLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-173-5084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P18318
NSN: 3110-00-173-5084
FSC: 3110
CAGE: 8E499 — KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO (USA)
SPECIFICATIONS
materialSTEEL BALL
alignment_typeRIGID
surface_finishGROUND
special_featuresBIT FOR HEXAGON, 2MM, 1/4 INCH TOOL FOR VXE30 MM
part_name_assigned_by_controlling_agencyBIT FOR HEXAGON, 2MM, 1/4 INCH MM
thrust_directional_capability_designationSINGLE
NSN3110-00-173-5084
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: P18318 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
MATERIALSTEEL BAND
MATERIALSTEEL WASHER
MATERIALSTEEL BALL
MATERIALCOPPER ALLOY RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
1828X5Interchangeable
interchangeable cross-reference
interchangeable
5524FInterchangeable
interchangeable cross-reference
interchangeable
109Interchangeable
interchangeable cross-reference
interchangeable
2065-16Interchangeable
interchangeable cross-reference
interchangeable
CT1087Interchangeable
interchangeable cross-reference
interchangeable
D37102Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P18318?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P18318?
P18318 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace P18318?
There are 30 known substitutes for P18318: 1828X5, 5524F, 109 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P18318?
P18318 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-173-5084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P18318

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026