PartsTable / COMPONENT / P1656
P1656
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, outside_diameter: 2.995 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 2.750 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN, cross-sectional_thickness: 0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-409-4441, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
P1656
NSN: 5330-00-409-4441 FSC: 5330 CAGE: 98810 — AEROSONIC LLC (USA)
SPECIFICATIONS
material PAPER OVERALL outside_diameter 2.995 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN style_designator CIRCULAR aperture_diameter 2.750 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN cross-sectional_thickness 0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification MIL-I-695 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL NSN 5330-00-409-4441
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: P1656
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• OUTSIDE DIAMETER: 2.995 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
• APERTURE DIAMETER: 2.750 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-I-695 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
• STYLE DESIGNATOR: CIRCULAR
• CROSS-SECTIONAL THICKNESS: 0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION OUTSIDE DIAMETER 2.995 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN APERTURE DIAMETER 2.750 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN MATERIAL PAPER OVERALL MATERIAL DOCUMENT AND CLASSIFICATION MIL-I-695 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL STYLE DESIGNATOR CIRCULAR CROSS-SECTIONAL THICKNESS 0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
8081B0440-3B Interchangeable interchangeable cross-reference
interchangeable
9051 Interchangeable interchangeable cross-reference
interchangeable
1656 Interchangeable interchangeable cross-reference
interchangeable
2222-9 Interchangeable interchangeable cross-reference
interchangeable
C600012890 Interchangeable interchangeable cross-reference
interchangeable
TD311 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy P1656?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1656?
P1656 is a FILTER ELEMENT,FLUID.
What parts can replace P1656?
There are 17 known substitutes for P1656: 8081B0440-3B, 9051, 1656 and 14 more. Substitute compatibility should be verified for your specific system.
Is P1656 still available?
P1656 is currently cancelled.