PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P1414-8
P1414-8 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,KNURLED is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: KNURLED, knurl_width: 0.172 INCHES NOMINAL IN, nut_diameter: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.328 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-468-8060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P1414-8
NSN: 5310-00-468-8060
FSC: 5310
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleKNURLED
knurl_width0.172 INCHES NOMINAL IN
nut_diameter0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.328 INCHES NOMINAL IN
thread_seriesUNF
thread_directionRIGHT-HAND
small_end_diameter0.422 INCHES NOMINAL IN
nominal_thread_size0.216 INCHES IN
counterbore_diameter0.320 INCHES NOMINAL NUT IN
nut_counterbore_depth0.095 INCHES NOMINAL NUT IN
NSN5310-00-468-8060
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P1414-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT DIAMETER: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.328 INCHES NOMINAL IN
•
NUT STYLE: KNURLED
•
NOMINAL THREAD SIZE: 0.216 INCHES IN
•
MATERIAL: COPPER ALLOY OVERALL
•
THREAD SERIES: UNF
•
KNURL WIDTH: 0.172 INCHES NOMINAL IN
•
NUT COUNTERBORE DEPTH: 0.095 INCHES NOMINAL NUT IN
TECHNICAL CHARACTERISTICS (FLIS)
NUT DIAMETER0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
NUT THICKNESS0.328 INCHES NOMINAL IN
NUT STYLEKNURLED
NOMINAL THREAD SIZE0.216 INCHES IN
MATERIALCOPPER ALLOY OVERALL
THREAD SERIESUNF
KNURL WIDTH0.172 INCHES NOMINAL IN
NUT COUNTERBORE DEPTH0.095 INCHES NOMINAL NUT IN
THREAD QUANTITY PER INCH28
SMALL END DIAMETER0.422 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
14148Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-70Interchangeable
interchangeable cross-reference
interchangeable
T-249-CInterchangeable
interchangeable cross-reference
interchangeable
1414+8Interchangeable
interchangeable cross-reference
interchangeable
2103-08-00-2520NInterchangeable
interchangeable cross-reference
interchangeable
L19HP14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P1414-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1414-8?
P1414-8 is a NUT,PLAIN,KNURLED.
What parts can replace P1414-8?
There are 11 known substitutes for P1414-8: 14148, GGG-T-70, T-249-C and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P1414-8?
P1414-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-468-8060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1414-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026