PartsTable
Technical Data Sheet
Download PDF

P1410-5 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P1410-5: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: LEAD OVERALL, outside_diameter: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, cross-sectional_thickness: 0.0625 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR METAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-274-8812, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P1410-5
NSN: 5330-00-274-8812
FSC: 5330 — Packing and Gasket Materials
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialLEAD OVERALL
outside_diameter0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
cross-sectional_thickness0.0625 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR METAL
material_document_and_classificationQQ-L-201 GR C FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-274-8812
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P1410-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.0625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-L-201 GR C FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
OUTSIDE DIAMETER: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
•
MATERIAL: LEAD OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.0625 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-L-201 GR C FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
OUTSIDE DIAMETER0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
APERTURE DIAMETER0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
MATERIALLEAD OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
113P016071Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
113B016071Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
016071Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P1410-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1410-5?
P1410-5 is a GASKET.
What parts can replace P1410-5?
There are 3 known substitutes for P1410-5: 113P016071, 113B016071, 016071. Substitute compatibility should be verified for your specific system.
What is the NSN for P1410-5?
P1410-5 is cataloged in the U.S. Government catalog under NSN 5330-00-274-8812. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1410-5