PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P132739
P132739 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, thickness: 0.031 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN, hole_diameter: 0.172 INCHES NOMINAL IN, overall_diameter: 0.375 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-193-7363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P132739
NSN: 5310-00-193-7363
FSC: 5310
CAGE: 70408 — AT AND T CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
thickness0.031 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
hole_diameter0.172 INCHES NOMINAL IN
overall_diameter0.375 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-193-7363
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P132739 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY OVERALL
•
THICKNESS: 0.031 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.172 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY OVERALL
THICKNESS0.031 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.172 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
9024-1Interchangeable
interchangeable cross-reference
interchangeable
10101-11 ITEM 41Interchangeable
interchangeable cross-reference
interchangeable
9324-1Interchangeable
interchangeable cross-reference
interchangeable
10088425Interchangeable
interchangeable cross-reference
interchangeable
90352Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P132739?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P132739?
P132739 is a WASHER,FLAT.
What parts can replace P132739?
There are 5 known substitutes for P132739: 9024-1, 10101-11 ITEM 41, 9324-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P132739?
P132739 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-193-7363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P132739

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026