PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P1310APCP1310-33
P1310APCP1310-33 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-190-1447, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P1310APCP1310-33
NSN: 5305-00-190-1447
FSC: 5305
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-190-1447
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: P1310APCP1310-33 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
THREAD CLASS: 3A A
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY FASTENER LENGTH AND THREAD CLASS
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
THREAD QUANTITY PER INCH: 48
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD CLASS3A A
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY FASTENER LENGTH AND THREAD CLASS
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
THREAD QUANTITY PER INCH48
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
MILB933TYPEAInterchangeable
interchangeable cross-reference
interchangeable
E87886-2Interchangeable
interchangeable cross-reference
interchangeable
FF-S-210Interchangeable
interchangeable cross-reference
interchangeable
FF-S-21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P1310APCP1310-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1310APCP1310-33?
P1310APCP1310-33 is a SCREW,MACHINE.
What parts can replace P1310APCP1310-33?
There are 4 known substitutes for P1310APCP1310-33: MILB933TYPEA, E87886-2, FF-S-210 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P1310APCP1310-33?
P1310APCP1310-33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-190-1447. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1310APCP1310-33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026