PartsTable
Technical Data Sheet
Download PDF

P12602380N — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P12602380N: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 15.360 INCHES NOMINAL IN, length: 50.240 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.562 INCHES NOMINAL IN, body_thickness: 0.134 INCHES NOMINAL IN, special_features: COVER HS TWO 11.500 IN. BY 6.000 IN.

OPENINGS; HAS TWENTY STUDS WELDED IN PLACE AND EQUALLY SPACED AROUND OPENINGS IN. This part is cataloged in the U.S. Government catalog under NSN 5340-01-182-4289, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P12602380N
NSN: 5340-01-182-4289
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width15.360 INCHES NOMINAL IN
length50.240 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.562 INCHES NOMINAL IN
body_thickness0.134 INCHES NOMINAL IN
special_featuresCOVER HS TWO 11.500 IN. BY 6.000 IN. OPENINGS; HAS TWENTY STUDS WELDED IN PLACE AND EQUALLY SPACED AROUND OPENINGS IN
securing_device_typeSPECIAL
peripheral_shape_styleRECTANGLE, MULTI HOLES
hole_quantity_along_width12
hole_quantity_along_length24
cross-sectional_shape_styleFLAT W/OPEN CENTER
mounting_opening_shape_styleUNTHREADED HOLE
NSN5340-01-182-4289
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P12602380N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.580 INCHES NOMINAL IN
•
LENGTH: 50.240 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 3.980 INCHES NOMINAL AND 4.170 INCHES NOMINAL AND 1.100 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 24
•
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH: 3.980 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 1.780 INCHES NOMINAL AND 3.540 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: A569-PO,FSCM 82796 MFR REF SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.580 INCHES NOMINAL IN
LENGTH50.240 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH3.980 INCHES NOMINAL AND 4.170 INCHES NOMINAL AND 1.100 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH24
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH3.980 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH1.780 INCHES NOMINAL AND 3.540 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONA569-PO,FSCM 82796 MFR REF SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEFLAT W/OPEN CENTER
SECURING DEVICE TYPESPECIAL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
P12602380Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy P12602380N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P12602380N?
P12602380N is a COVER,ACCESS.
What parts can replace P12602380N?
There is 1 known substitute for P12602380N: P12602380. Substitute compatibility should be verified for your specific system.
What is the NSN for P12602380N?
P12602380N is cataloged in the U.S. Government catalog under NSN 5340-01-182-4289. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P12602380N

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.